Howdy guys! My last attempt was very successful! As observed, the clear sub-assembly is rubbing against the main cover. Install some foam strips BETWEEN the clear assembly and main cover bottom clips, side "legs" and area above the slit on the clear assembly -- place foam under to insulate against the cover plate. Also place some foam at the corner of the clear assembly going up from the slit.

Hope this helps. If someone wants a new picture, I guess I can pull off the assembly again for ya!

2007 Toyota Camry Hybrid base Jasper Pearl -- I CANNOT seem to get that Average Mileage log to display here: 30.0 MPG as of 7/2008!!