Quote:
Originally Posted by Orient Express
There are 2 10mm bolts to remove and a bunch of plastic fasteners that just pop out with a flat bladed screwdriver, and push back in by hand.
You should get some ramps to make it easier to get under the car.
|
I have a set of ramps and my HCH bumper/airdam hits the ramp surface as soon as I start to drive up them. I guess I will need a new set that has less of an angle. Even when I put it up on jackstands, I cannot get the plastic fairing out of the way (I disconnect the front of it and the front of the fairing on the bottom lowers.)
Because I cannot get the car up high enough, the plastic fairing is in the way of putting my oil-change tray under the filter.
Has anyone else had to get a different set of ramps or a jack with a much higher lift to enable them to get under there and work?