I suspect this is the part you probably need:
http://www.trademotion.com/partlocat...=1&catalogid=2

It takes about five minutes to install. You have to remove the shift knob, the "rear trim" (8), and the little trim pieces on the left and right of the upper console. The trim pieces come off with just a tug, or a little levering. If I recall correctly, the only tool you need is a plastic putty knife to use for prying, and a phillips screwdriver. (You might want to have a 10mm socket on hand, just in case I don't.)

There are some pictures in the post about installing a backup camera that might be helpful:
http://www.greenhybrid.com/discuss/f...ictures-11672/