Awhile back, msantos posted the following instructions for activating a main guage panel diagnostic. When I followed the instructions, all of my guage lights start blinking, I receive an "error 1" message. Does msantos (or anyone else) know what an "error 1" is? Thanks.

"There is a self diagnostics mode for the main gauge panel that you can try. Do the following to evoke the test:
1- press and hold the SEL/RESET button
2- turn the headlights ON
3- Turn the ignition ON to (II)
4- within 5 seconds turn the headlights OFF, then ON, then OFF
within 5 seconds release the SEL/RESET button, then push and release the button 3 times repeatedly.
5- use the SEL button the iterate through the tests.
If you turn the igntion Switch to OFF then the test ends."