Thread: Transmission Fluid Capacity and Servicing
View Single Post
  #6 (permalink)  
Old 05-03-2008, 09:50 AM
DesertDog's Avatar
DesertDog DesertDog is online now
Active Enthusiast
  
Real Name: Carl
Location: Dry Heat, AZ
Hybrids: 2005 FEH 2WD
Posts: 242
Default Re: Transmission Fluid Capacity and Servicing
Quote:
Originally Posted by Ari View Post
Look in your owner's manual. My 2006 says the refill capacity is 5.3 quarts of Motorcraft MERCON (red) ATF.

There is a note: "Indicates only approximate dry-fill capacity.Do NOT use Motorcraft MERCON CVT (blue) ATF. This vehicle uses only MERCON (red) ATF."

There is also a note: "Using any transmission fluid other than those that meet the recommended specification may cause internal transaxle damage. Do NOT use Motorcraft MERCON CVT (blue) ATF. This vehicle uses only Motorcraft MERCON (red) ATF."

There is no mention of the eCVT in the maintenance schedule. The instructions to check the fluid level are on pg. 285 of my manual and it doesn't tell you how to drain the fluid, only how to pull the top plug and check the level.

Anyone done a fluid change yet? I have 55k on my FEH and I'd like to change the fluid at 60k. All I really need to know is what bolt needs to come out on the bottom of the engine - this should totally be a DIY job.
Remove the shield on the bottom LH side and the drain plug is readily apparent. Drain the fluid, reinstall the bottom plug, then remove the plug on the side and fill till it just reaches the level of the side plug. Replace the side plug and you're done. Should take even less time than a motor oil change.
Reply With Quote