Got my fogs installed except for running the wires through the fiewall and installing the switch. Figured out the wiring before I started the install since there were no wiring instructions. Nice OEM set from Ebay. I am debating about splicing into the parking lights to power the relay. Thoughts anyone? That would eliminate the swith and running the wiring through the firewall. They would also go out with the lights.

Any help on aiming the fogs when I'm done? I usually back my car about 25 feet from my garage door and aim them below my main lights. The lights have adjusting knobs on the bottom, should be easy enough.

Found the main battery lug in the fuse box under the hood. Ran my main 12V feed for the lights off it through the relay. A lot easier than running off the battery in the trunk. I haven't had a chance to take pics of the install, I am having trouble sizing them to be useable after attaching them. Not so good on the computer. I will try to write up the install instructions after I'm finished. It pretty straight forward.

I'm waiting on a replacement bezel, one was broken when I received it, the Ebay seller is replacing it.