Quote:
|
Originally Posted by Fastforward
I just recently ordered another NYS EZ-Pass car module that mounts on the windshield. The EZ-Pass modules is used to automatically pay tolls on major toll roads in NY, Mass, NJ, etc. on my other cars, I typically mount the module on the front windshield behind the rear view mirror and just under the tint line. I noticed that there is an area on the TCH consisting of dotted pattern on the upper part of the wind shield behind the rear view mirror. Has anyone tried to mount and use an EZ-pass module in their TCH and where did you mount the module?
Thanks for the information.  |
1) I mount it outside the dotted pattern. To the right and slightly above the mirror. It that location it is still blocked by the mirror from the driver's view.
2) That said, I do not mount it permanently since I have two automobiles and use the one transponder on both cars. I picked up a nice suction cup mount on eBay and then looped a heavy duty rubberband through one of the suction cup holes nearest the rearview mirror. I loop the rubberband around the mirror. That way if the suction cups should become detatched from the windshield the transponder doesn't fall (onto the NAV screen) and the rubber band is short enough to minimize an absorb any minor shock with the transponder becoming dislodged. Rather tha fall it would just swing. It's never fallen off the window.
http://cgi.ebay.com/ebaymotors/BLACK...spagenameZWDVW