View Single Post
  #1 (permalink)  
Old 03-22-2005, 04:16 PM
mppkll's Avatar
mppkll mppkll is offline
Active Enthusiast
 
Real Name: Mike
Location: Detroit metro area
Hybrids: 2005 Ford Escape Hybrid
Posts: 175
Default BlitzSafe Aux converter install

I had a '03 civic hybrid until just a month ago when I traded it for a Escape Hybrid (loved the Civic but I needed the room of the Escape). While I had my Civic I installed an input converter to allow me to play my mp3 player throught the factory audio system. These are pictures of the install in case anyone wishes to do the same.


1. Remove the switch blank (see photo) and carfully pull the dash panel out. There are sveral spring clips holding it in place (see photo)

2. unplug the 12v outlet connector from the back of the 12v outlet (see photo).

3. connect the aux converter by and reaching up behind the headunit and plugging in the conector to the headunit.

4. secure the aux converter and attach the 1/4 in. mini plug to RCA cable to the aux converter (see photo).

5. route the cable to a good spot to attach your mp3 player

6. test to make sure it works (see photo in part B)

7. reconnect the 12v outlet and carefully replace the dash panel.

8. enjoy
Attached Thumbnails
blitzsafe-aux-converter-install-image-26-.jpg.jpg
Views:	75
Size:	30.3 KB
ID:	32   blitzsafe-aux-converter-install-image-07-.jpg.jpg
Views:	71
Size:	29.3 KB
ID:	33   blitzsafe-aux-converter-install-image-24-.jpg.jpg
Views:	74
Size:	39.4 KB
ID:	34   blitzsafe-aux-converter-install-image-15-.jpg.jpg
Views:	69
Size:	34.1 KB
ID:	35   blitzsafe-aux-converter-install-image-19-.jpg.jpg
Views:	84
Size:	49.8 KB
ID:	36  


Last edited by mppkll; 03-22-2005 at 04:28 PM.
Reply With Quote