You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I bought the Moog links at Rock and installed them yesterday. It was an easy job - maybe 45 minutes at most. Fixed the clunk, nicely. These links have a much larger ball joint end with grease fittings and I'm hoping they will not need replacing for a good long while.
Does anyone know how often the links should be greased?
Update:
The Moogs started rattling at about 8000 miles, so I replaced them again (free due to lifetime warranty). Kinda disappointing.
Originals lasted 30,000 miles, second set Motorcraft (installed under warranty) lasted about 18,000, Moogs only 8000 .
This was timely. I'm getting ready to replace the front sway bar links on my truck and recently noticed that my wife's 2007 FEH rattles quite a bit (seems up front, but maybe in the back, too) and maybe it's time to replace the links. Sounds like either NAPA or OEM is the way to go given travelover's Moog comment.
Just a follow up. I started getting a really loud and nasty clunk on rough surfaces at low speeds. It would also clunk if you turned the steering wheel left and right at about 20 mph.
I had recently replaced my stabilizer links, so I was pretty sure that wasn't it. Today I discovered that one nut had come loose on the lower stabilizer attachment - just a little but enough to make an loud clunking.
Re: Sway Bar Link Clunking Again
.
