All the X-gauges I have set up in my SG II work perfectly (SOC etc.). I recently set up the 4WD on/off gauge & I thought it worked fine at first but this morning I realized it actually is not working correctly.

We had a ton of snow last night (we have had more snow in the last 24 hours than we had all of last December) & this morning my street was not plowed. I was accellerating hard to see how well I could go in the snow & the 4WD was definitely working, but the gauge said off the entire time.

Is there a trick to this gauge that I don't know about??

~John

Pictures of a few of the modifications I have made to the truck:

http://www.pbase.com/jmorton10/inbox&page=all

Well, surfing found two PIDs that are used for 4WD low on regular Fords, so maybe they will work on the FEH. PID A211 b3 could be tried instead of the 1101 PID.

That would be TXD=07E022A211 and RXF=046225A20611 and everything else the same.

thanks, I'll try that

~John

Pictures of a few of the modifications I have made to the truck:

http://www.pbase.com/jmorton10/inbox&page=all