Gang....
So, finally got a Nav into a Canadian Camry with the energy screens working. Pics below.
Many Many thanks to JHSmith from this forum for providing the critical part information, and to Rosner Toyota of Fredericksburg who got me the correct Nav unit.
The good news:
It's actually pretty easy to install. It only requires 3 more wires compared to the non-hybrid Nav system, 2 CAN buss wires, and an ignition sense wire. The CAN wires are located right behind the Nav, and the ignition sense wire is behind the trim on the left where the mirror controls are.
It does everything the one they install from the factory does, no exceptions.
The bad news:
If you already have a Nav unit, you are screwed. They are different units.
As per JHSmith and confirmed by me:
Non-Hybrid Unit
Lower left of face: E7012
Part Number: 86120-06390
Hybrid Unit:
Lower left of face: E7011
Part Number: 86120-33A30
It would appear the CAN module required to get the information for the energy screens is not even in the Non-Hybrid units.
Part two of the bad news is the price. Currently the only source I know of for these is the dealer, and as you can imagine, it's not the cheapest thing in the world buying one of these from a dealer.
But, at least I can confirm it is possible to do. Once again, big thanks to JHSmith!
If anyone wants more info on connecting it up, or converting from the radio to either hybrid or non-hybrid Nav, PM me and I can send you some info.
Later!
Dang