Grid charger help!
#1
Grid charger help!
Hello my name is Gabe and I am new to this forum and I was hoping to get in touch with someone who has a grid charger/discharger that I could borrow. My car has all the symptoms of an inbalanced battery and I want to get it back to good working conditions without having to swap out for a bumblebee pack. The pack that is in there was changed out a little over two years ago. Any help would be appreciated. I live in the north bay Vallejo ca.
#2
Re: Grid charger help!
Before you even attempt grid charging, disconnect your 12V for 60 seconds and reconnect it.
Rev to 3500rpm and hold until battery reads full.
Pull the IPU lid (steps 1-9):
https://hybridautomotive.com/pages/install-i1.html
Let it rest overnight.
Locate the BCM connector SHOWN in step 13. Of the two silver boxes on top of the pack, it's the left one - the gray connector with several color wires sprouting from the thick orange cable.
WITHOUT UNPLUGGING THE CONNECTOR, check the 10 voltages and report back. I flipped the connector so it's in the orientation you see at the BCM:
Rev to 3500rpm and hold until battery reads full.
Pull the IPU lid (steps 1-9):
https://hybridautomotive.com/pages/install-i1.html
Let it rest overnight.
Locate the BCM connector SHOWN in step 13. Of the two silver boxes on top of the pack, it's the left one - the gray connector with several color wires sprouting from the thick orange cable.
WITHOUT UNPLUGGING THE CONNECTOR, check the 10 voltages and report back. I flipped the connector so it's in the orientation you see at the BCM:
Thread
Topic Starter
Forum
Replies
Last Post
sfenwick76
HCH I-Specific Discussions
14
03-25-2017 03:48 PM
atikovi
Honda Insight
0
04-21-2014 05:45 AM
navguy12
HCH II-Specific Discussions
3
01-14-2012 01:53 PM