P2797 question
#1
P2797 question
So for about a month my truck has been having issues coming to a stop an leaving from a stop. Rarely done it at first. Ran codes with tech 2 and nothing. Finally it started acting up left and right and only threw a p2797. Truck is a 09 with right at 158k on it. I inspected the aux pump harness and doesn't look to be damaged. Should I go ahead and replace it? Also read somewhere it can be hybrid 1-2 clutches. Any input?
#4
Re: P2797 question
Good luck. As a former Mr. Goodwrench I can tell you that newer products are so packed with computers and communication wires.
Being a Master mechanic was not enough so I went back to school for Electrical Engineering.
For "self defense".
Being a Master mechanic was not enough so I went back to school for Electrical Engineering.
For "self defense".
#6
Re: P2797 question
Originally Posted by Hillbilly_Hybrid
Good luck. As a former Mr. Goodwrench I can tell you that newer products are so packed with computers and communication wires.
Being a Master mechanic was not enough so I went back to school for Electrical Engineering.
For "self defense".
Being a Master mechanic was not enough so I went back to school for Electrical Engineering.
For "self defense".
#7
Re: P2797 question
#8
Re: P2797 question
hello.my 08 yukon 227000 miles on it is throwingg p2797 trans code among a couple others but i see this code over and over as im clearing and trying to figure ropt cause .
it is definatly having issues from motor to idle mode .
cannot find any videos and replacemant procedures ?
anyone remove and replace aux trans pump ? did that splve anyones issues with p2797 .
it is definatly having issues from motor to idle mode .
cannot find any videos and replacemant procedures ?
anyone remove and replace aux trans pump ? did that splve anyones issues with p2797 .
Thread
Topic Starter
Forum
Replies
Last Post
Green1y1z
GM Hybrid Trucks, Cadillac Escalade Hybrid, Chevrolet Tahoe Hybrid & GMC Yukon Hybrid
14
12-01-2020 06:42 PM
tecz0r
Ford Escape Hybrid
10
05-13-2015 01:30 PM