DIY Repair of traction blend door actuator
#1
DIY Repair of traction blend door actuator
At this link: http://www.escape-city.com/viewtopic.php?f=24&t=1229 is a DIY guide for repair of a known issue. There are photos as shown here:
Can anyone now do this repair and post "real" photos to make the job even easier?
Can anyone now do this repair and post "real" photos to make the job even easier?
#3
Re: DIY Repair of traction blend door actuator
I'd be game to tackle this (been getting an intermittent wrench light on my new-to-me 08), but what do I do when I get to step 16?
16. Reprogram the Traction Battery Control Module (TBCM) to the latest calibration using IDS release B52.5 and higher with Patch 7.
16. Reprogram the Traction Battery Control Module (TBCM) to the latest calibration using IDS release B52.5 and higher with Patch 7.
#4
Re: DIY Repair of traction blend door actuator
I would think that the code would be the same for FWD as AWD... or do you know differently?
#6
Re: DIY Repair of traction blend door actuator
Try it and report back on the findings.
#7
Re: DIY Repair of traction blend door actuator
So that is the first number, which is already 076? Not the 2nd number, which has 045 already? I read the post as being for an AWD, which is what I have.
#8
Re: DIY Repair of traction blend door actuator
so if i want to check my blend door operation...i just get a scanguage2 ..hook it up and..???? what parameters am i checking? What do other 3 numbers mean...and what is 0000DTC??/ I have 06 mariner hybrid with 138kmiles....and want to make sure things are working properly...i got the dreaded wrench light that went away after next startup....so id like to get SC2 and catch the code sometime
#9
Re: DIY Repair of traction blend door actuator
Go to scanguage.com and read up on this piece of hardware that you have to program (input) "numbers" to display information.