DIY: LED install
#21
03-23-2008, 06:35 PM
Re: DIY: LED install
sorry i've miss the earlier question
CCT = circuits
after a few months the brake LED resistor burn up as braking amps too much for the small resistor to absorb, therefore the internal braking related circuits screwed
as for the turn signal it will not work due to the turn relay required certain amp feedback before it will blink,
my tot - if i need to increase the wattage for the blinkin to work it will defeat the purpose of LED saving energy/amps
CCT = circuits
after a few months the brake LED resistor burn up as braking amps too much for the small resistor to absorb, therefore the internal braking related circuits screwed
as for the turn signal it will not work due to the turn relay required certain amp feedback before it will blink,
my tot - if i need to increase the wattage for the blinkin to work it will defeat the purpose of LED saving energy/amps
#22
03-23-2008, 08:44 PM
Join Date: Jul 2007
Location: San Diego, CA, USA
Posts: 941
Re: DIY: LED install
if i need to increase the wattage for the blinkin to work it will defeat the purpose of LED saving energy/amps
Thread
Topic Starter
Forum
Replies
Last Post
