Firewall access for 12 batt access?
#11
Re: Firewall access for 12 batt access?
The empty slots on the bottom row are all hot. Use a circuit tester to determine which ones are switched and unswitched. I believe that 5 is unswitched and 7 and 8 are switched.
#13
Re: Firewall access for 12 batt access?
Ok, this is getting ridiculous. Is there a specific Honda add-a-circuit? The fuses will not fit in the add-a-circuit dongle I got, although it fits fine in the slot in the fuse box.
The car fuses now have the extra-teeny legs that will not fit in the separate slots.
Funny thing is that I get no power from the add-a-circuit when it is in an empty powered slot, so that tells me there must be a special connector, right?
The car fuses now have the extra-teeny legs that will not fit in the separate slots.
Funny thing is that I get no power from the add-a-circuit when it is in an empty powered slot, so that tells me there must be a special connector, right?
#14
Re: Firewall access for 12 batt access?
The Honda mini-fuses are a little bit different from a standard mini-fuse, but are interchangeable. Just go get some standard mini-fuses of the correct amperage for your setup.
The reason that you may not be getting any power to the add-a-fuse circuit is that you have it plugged in upside down. Try turning it around. (now think about why this is so...)
The reason that you may not be getting any power to the add-a-fuse circuit is that you have it plugged in upside down. Try turning it around. (now think about why this is so...)
Last edited by Orient Express; 04-21-2008 at 06:03 PM.
Thread
Topic Starter
Forum
Replies
Last Post