2006 Escape HYBRID DIY friendly?

Thread Tools
 
Search this Thread
 
  #1  
Old 02-20-2014, 09:22 PM
JOE SKI's Avatar
Enthusiast
Thread Starter
Join Date: Feb 2014
Posts: 6
Default 2006 Escape HYBRID DIY friendly?

I am thinking about buying a used 2006 hybrid with 150,000 mi. and was wondering what I should look at before I purchase it. I just read the thread on the battery cooling fans and pumps and was wondering what other issues this model may have and if I can repair them myself since the factory warrantee would have expired and the dealers costs are huge. I have an OBII scanner for my '97 F-150 and was wondering if it will work on the Escape. Any suggestions will be appreciated. Thanks
 
  #2  
Old 02-21-2014, 03:52 AM
GeorgiaHybrid's Avatar
Super Moderator
Join Date: Nov 2007
Location: NW Georgia
Posts: 1,263
Default Re: 2006 Escape HYBRID DIY friendly?

If you have a normal scanner (cost less than $100 or so), it will read the generic OBD/II codes on the Escape. Depending on the scanner, some of them will go into manufacture specific codes and have a limited ability to read ABS, BCM and other modules on the car and perform some diagnostic testing.

As far as the car goes, 95% of it works just like a regular Escape and repairs are identical. The hybrid components are not bad as long as you observe the basic safety rules dealing with high amperage/voltage circuits as those can KILL you if you get stupid. Buy/borrow the right equipment and safety gear and have fun as a LOT of us hybrid owners do our own repair work.
 
  #3  
Old 02-21-2014, 12:27 PM
JOE SKI's Avatar
Enthusiast
Thread Starter
Join Date: Feb 2014
Posts: 6
Default Re: 2006 Escape HYBRID DIY friendly?

Thanks for the reply. I just started researching hybrids and I like the escape but am hesitant to buy something with 150k miles on it.
 
  #4  
Old 02-21-2014, 01:27 PM
D-mac's Avatar
Pretty Darn Active Enthusiast
Join Date: Feb 2007
Posts: 408
Default Re: 2006 Escape HYBRID DIY friendly?

There are some people who have had good experiences with used hi miler FEH's but others its been a nightmare. Maybe the better question is do you feel lucky?
Even if you can replace them yourself, drivetrain parts like PTU, HCU, eCVTs, etc. may not be cost effective to replace on a 9+ year old FEH.
The taxi FEHs that had very high miles did so in a relatively short time period and had fleet mechanics & Ford engineering support.
 
  #5  
Old 02-21-2014, 05:49 PM
GatorJ's Avatar
Ridiculously Active Enthusiast
Join Date: Apr 2006
Posts: 565
Default Re: 2006 Escape HYBRID DIY friendly?

Originally Posted by D-mac
There are some people who have had good experiences with used hi miler FEH's but others its been a nightmare. Maybe the better question is do you feel lucky?
Even if you can replace them yourself, drivetrain parts like PTU, HCU, eCVTs, etc. may not be cost effective to replace on a 9+ year old FEH.
The taxi FEHs that had very high miles did so in a relatively short time period and had fleet mechanics & Ford engineering support.

OP: This poster's experiences are not at all typical.
 
  #6  
Old 02-22-2014, 06:32 PM
JOE SKI's Avatar
Enthusiast
Thread Starter
Join Date: Feb 2014
Posts: 6
Default Re: 2006 Escape HYBRID DIY friendly?

I dont kno. But i would like one...hi miles or not!
 
  #7  
Old 02-23-2014, 05:21 AM
Billyk24's Avatar
Active Enthusiast
Join Date: Jan 2013
Posts: 175
Default Re: 2006 Escape HYBRID DIY friendly?

Where do you live? Those living where real winter conditions exist year after year will have some additional information for you. The vehicle's service record/history will also play a role in how well the vehicle will age.
 
  #8  
Old 02-23-2014, 09:07 AM
JOE SKI's Avatar
Enthusiast
Thread Starter
Join Date: Feb 2014
Posts: 6
Default Re: 2006 Escape HYBRID DIY friendly?

N.E. Pa.
 
  #9  
Old 02-23-2014, 02:58 PM
Billyk24's Avatar
Active Enthusiast
Join Date: Jan 2013
Posts: 175
Default Re: 2006 Escape HYBRID DIY friendly?

Then you need option 41H hooked up as this will enable your hybrid battery heater to work off the electrical outlet. I'm in Pa at the other end of the state. FYI, I got over 100,000 miles on my FEH and just started to get the wrench light warning. I still have the OEM MECS pump that many other owners replaced much earlier in their vehicle's life.
 
Related Topics
Thread
Topic Starter
Forum
Replies
Last Post
07civichybrid
HCH II-Specific Discussions
48
09-15-2018 06:17 PM
thanksjc
Ford Escape Hybrid
3
06-11-2013 05:48 AM
Jason
Hybrid & Related News
1
08-28-2008 03:54 AM
RichC
Events & Gatherings
2
05-18-2005 08:52 PM
Jason
Hybrid & Related News
0
10-01-2004 09:14 PM



Quick Reply: 2006 Escape HYBRID DIY friendly?


Contact Us -

  • Manage Preferences
  • Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

    When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

    © 2024 MH Sub I, LLC dba Internet Brands


    All times are GMT -7. The time now is 12:51 AM.