HV Battery Cooling Fan Replacement

Thread Tools

Search this Thread

#31

07-20-2019, 11:22 AM

91Bear

Enthusiast

Join Date: Mar 2013

Posts: 6

Re: HV Battery Cooling Fan Replacement

Quote:

Originally Posted by TylerScape

After quite a bit of time looking, is there anywhere I can order these fans online? I have a 2011 FEH and I am in need of new cooling fans for the Battery

Well, the guy in the post above you has an extra set of fans!

If the part number is the same for the 2011 as for the 2006, you can get them here: https://parts.autonationfordwhitebea...ly-5m6z10c659b

#32

07-24-2019, 09:39 AM

shazam

Enthusiast

Join Date: Jul 2019

Posts: 2

Re: HV Battery Cooling Fan Replacement/ Wrench Light

Hi all,

On my way to the dealership now in northern MI where they know nothing about hybrids...

My wrench light has been on since I bought the 2012 Ford Hybrid EScape a few months ago. It goes on after an hour on the hwy, especially on hot days. On a cold rainy day, I couldn't get it to come on.

I've had the hybrid coolant pump replaced already, light still on.

I get this code:

Common Problems That Trigger the P0A7C Code

Converter failure
High voltage control module failure
Hybrid transaxle assembly failure
Motor electronics coolant temperature sensor failure

I'm assuming I should have him start at the MECs sensor? It seems that's what everyone here has done first with wrench light issues.

Any thoughts welcome! Heading in shortly (15 mins...) Hopefully I'm not too late.

I also printed out the battery blend door change instructions for him but that's a different code. I assume that code would have come up in diagnosis?

Thanks for your help!!

Shazam

#33

07-24-2019, 09:41 AM

shazam

Enthusiast

Join Date: Jul 2019

Posts: 2

Re: HV Battery Cooling Fan Replacement

Also, I'm getting lousy mileage. It rarely goes into hybrid mode - only at 20mpg or so.

#34

10-29-2019, 07:52 AM

bofronado

Enthusiast

Join Date: Dec 2018

Posts: 9

Re: HV Battery Cooling Fan Replacement

Quote:

Originally Posted by nicknc

P0A27 is the code for that wiring harness installation/replacement.

What is this process? I can't seem to find anything about it. Is this to clean or replace a harness to the traction battery? I seem to get a stop safely now issue, but it only happens on very warm days and when driving in town.