Latest Calibration Information
#1
03-12-2006, 08:38 PM
Latest Calibration Information
Latest Calibration Information
Obtain the latest calibration information for emission-related modules by selecting the link at the bottom of this page. This page can be printed for usage instructions.
Instructions for determining the most recent module calibration released:
Obtain the latest calibration information for emission-related modules by selecting the link at the bottom of this page. This page can be printed for usage instructions.
Instructions for determining the most recent module calibration released:
- Find the tear tag on the vehicle. It is a white tag located on the module or in an easily accessible place such as the doorjamb or engine cowl. The tag contains a four-digit letter/number combination (e.g.: VCS0), called the "catchword." Record this value.
- Open the file attached below, under "Access Latest Calibration Information."
- Using the arrows and dropdown menus in the file, find the Model, Year, Engine Size, and Engine Type.
NOTE: If the model year is not listed, use the previous model year. - For this vehicle, find the catchword recorded from the tear tag.
- Check the "TSBPartNum" column. If there is a part number listed there for this catchword, go to step 7.
- If there is no part number listed in the "TSBPartNum" column, check the "NewPartNum" column. If no new part number is listed, this is the most recent calibration.
- If there is a new part number or a TSB part number listed, find it in the "PartNum" column.
- For this part number, check the "NewPartNum" column and determine whether or not a subsequent new part number is listed.
- Continue the process until no new part number can be found. The final "PartNum" found is the most recent calibration released for this vehicle.
Last edited by SAM Hybrid; 03-12-2006 at 08:40 PM.
Thread
Topic Starter
Forum
Replies
Last Post
tigerhonaker
Journalism & The Media
0
01-11-2006 06:21 PM
