Oxygen generator/separator feasiability..?
#1
05-12-2010, 08:42 PM
Join Date: Sep 2006
Location: Beautiful Pacific NW
Posts: 1,678
Oxygen generator/separator feasiability..?
Flow the 80% separated nitrogen into the intake manifold for reducing pumping losses and compress the oxygen output for later use in effectively increasing the engine displacement during acceleration events. WOT POWER NEEDS...
Last edited by wwest; 05-18-2010 at 05:50 PM.
#2
05-13-2010, 03:57 AM
Re: Oxygen generator/separator feasiability..?
I believe this belongs over in the General Forum section.
#4
05-13-2010, 09:00 AM
Join Date: Sep 2006
Location: Beautiful Pacific NW
Posts: 1,678
Re: Oxygen generator/separator feasiability..?
Already too old to bother with getting rich..!
Besides which patents only serve to delay, most, technological aspects entry into the marketplace.
Besides which patents only serve to delay, most, technological aspects entry into the marketplace.
#5
05-14-2010, 07:00 PM
Re: Oxygen generator/separator feasiability..?
The idea is simple enough. The ability to do that efficiently on the fly would be the real magic part. I'm not sure you could even patent the general idea anyway, only the particular mechanism.
#7
05-14-2010, 08:43 PM
Re: Oxygen generator/separator feasiability..?
What? No picture of a troll? Your slipping!!
#8
05-16-2010, 11:55 AM
Re: Oxygen generator/separator feasiability..?
Just add a Nitrous Oxide system. Or, any number of hydrogen / oxygen generators are available using the battery power to split H2O atoms. Store them up and use them as you would NO2. Lots of research going on in this area for fuel cell EV's and hybrids.
Thread
Topic Starter
Forum
Replies
Last Post
CooperLab
HCH I-Specific Discussions
56
11-07-2014 01:24 PM
jonmatt4nr
HCH II-Specific Discussions
17
04-20-2009 12:11 PM
