Anyone seen/applied body side molding?
#1
Anyone seen/applied body side molding?
Has anyone seen or applied the accessory body side molding to the '07 Camry? I know it's available, but I'd like to check it out before buying. Mine's a Magnetic Grey TCH.
Thanks,
GH
Thanks,
GH
#3
Re: Anyone seen/applied body side molding?
#4
Re: Anyone seen/applied body side molding?
Originally Posted by ghull
Has anyone seen or applied the accessory body side molding to the '07 Camry? I know it's available, but I'd like to check it out before buying. Mine's a Magnetic Grey TCH.
Thanks,
GH
Thanks,
GH
https://www.greenhybrid.com/share/br...imageuser=4937
#5
Re: Anyone seen/applied body side molding?
These are OEM or so they say. http://cgi.ebay.com/ebaymotors/TOYOT...spagenameZWDVW
#7
Re: Anyone seen/applied body side molding?
Originally Posted by skywagon
Thanks for the info. SK
#10
Re: Anyone seen/applied body side molding?
I'm the one who posted the pix of the white ones.
We've had them for a couple of weeks and like them. In addition to a bit of protection, they add a bit of a line to the car.
I bought them over the web (I assume that several of the parts sites have them). http://www.toyotapartsdelivered.com/...t.cfm?design=9 . The regular 07 Camry ones are the same as the hybrid.
There is a template carfully hidden in the box. You use tape, I used painters edging tape, to mark the height from landmarks at the front and the back of the car. You then run another horizontal run of tape between the landmarks to act as a straight edge. You the apply the edging. It is just very high powered, automotive grade, double faced tape.
NOTE: The edge guards do not go in a line that is straight with the bottom of the doors. Follow the template instructions for measuring and you will do fine!
We've had them for a couple of weeks and like them. In addition to a bit of protection, they add a bit of a line to the car.
I bought them over the web (I assume that several of the parts sites have them). http://www.toyotapartsdelivered.com/...t.cfm?design=9 . The regular 07 Camry ones are the same as the hybrid.
There is a template carfully hidden in the box. You use tape, I used painters edging tape, to mark the height from landmarks at the front and the back of the car. You then run another horizontal run of tape between the landmarks to act as a straight edge. You the apply the edging. It is just very high powered, automotive grade, double faced tape.
NOTE: The edge guards do not go in a line that is straight with the bottom of the doors. Follow the template instructions for measuring and you will do fine!
Last edited by Scooters; 08-09-2006 at 07:00 PM.
Thread
Topic Starter
Forum
Replies
Last Post
2008, body, camry, door, exterior, highlander, horizontal, installation, installing, molding, moulding, position, side, template, toyota