|
How to add SOC to Scangauge II???
Good Morning everyone
Anyone know how to add SOC (state of Charge) function to a 2009 Camry Hybrid, with the ScanGauge II attached. I just got mine and everything works, however I cannot find a way to add these functions to the gauge display. I know I read somewhere that it comes with the 3.15 version which I just received yesterday. Thanks tim |
Re: How to add SOC to Scangauge II???
I don't see a version 3.15 listed for ScanGauge. About 8 months ago I sent in my SC in and had the firmware updated to the XGauge.
I called the company a while back and was told the traction battery information would be listed for the TCH when they find the proper codes. They do list a few for the Prius. Select the XGauge link on the web page below. http://www.scangauge.com/support/ The Escape Hybrid - Traction Battery: state of charge, voltage, temp and traction battery speed? The Toyota Prius - Traction Battery: SOC, voltage and current. For more information, you might try contacting support. |
Re: How to add SOC to Scangauge II???
Originally Posted by rburt07
(Post 181692)
I don't see a version 3.15 listed for ScanGauge. About 8 months ago I sent in my SC in and had the firmware updated to the XGauge.
I called the company a while back and was told the traction battery information would be listed for the TCH when they find the proper codes. They do list a few for the Prius. Select the XGauge link on the web page below. http://www.scangauge.com/support/ The Escape Hybrid - Traction Battery: state of charge, voltage, temp and traction battery speed? I bought it on a group buy and it was shipped directly from the manaf. Under the settings you can check for version number and mine was 3.15 which is the latest. I tried the other codes without any sucess and was hoping that someone might have lucked out with a code that works for the camry hybrid. tim The Toyota Prius - Traction Battery: SOC, voltage and current. For more information, you might try contacting support. |
Re: How to add SOC to Scangauge II???
Evidently they are not yet advertising the version 3.15. I wish the prius traction battery codes would work in the TCH. I was told that they won't.
|
Re: How to add SOC to Scangauge II???
I sent an e-mail to scanguage and I am still waiting for a reply, it has been 3 days now.
tim |
Re: How to add SOC to Scangauge II???
I would imagine the scan gauge people are busy selling their product. Not that many weeks ago CNN had a segment on a hypermiler named Wayne Gerdes. This fellow was capable of getting 59 mpg out of a regular gas only powered Honda Accord. Their was some reference to the scan gauge he was using. I'm sure that exposure really picked up their sales.
|
Re: How to add SOC to Scangauge II???
I broke down and bought the SG to learn more about how the car behaves and to try and use LOL's method to get into heretical mode.
Now I'm trying to find any info on the xgauge commands for the TCH. Anyone have any or a link to some website? Thanks! |
Re: How to add SOC to Scangauge II???
How to add a X gauge and a list of them are in your scan gauge instruction booklet. Here is the Linear Logic web page for the same subject.
http://www.scangauge.com/support/xgauge.shtml |
Re: How to add SOC to Scangauge II???
Sorry, I wasn't clear.
Does anyone have the xgauge codes or a location where I can find them for TCH functions? Thanks. |
Re: How to add SOC to Scangauge II???
as of today all of my e-mails to customer service have gone unanswered, it appears that they simply want to mass sell their units with to little to nil support for customer service.
Generally not a bad unit, not easily installed in the camry, and absolutely no support for the functions that the camry really needs. Did I fail to mention that their customer and tech service ignore all the e-mails for weeks to months??? |
| All times are GMT -7. The time now is 10:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands