Scan Gauge II Setup
 

If you bought a Scan Gauge II - be sure to change the engine type to HYBRID or the unit will time out, as I found out the hard way - its in the book but who reads the book....:embarass:

HOME>MORE>SETUP>FUEL>HYBRID

Re: Scan Gauge II Setup
 

My SG2 shutoff at the first stoplight which reminded me to set the fuel type.

I set the speed correction to 3% and now my GPS and the SG2 match as far as current speed is concerned. Trip distance is still slightly off but not as much as before the correction.

Re: Scan Gauge II Setup
 

Driving in this morning (playing with this thing in the rain at 70 MPH), I tried 1, 2, and 3% comparing it to my hand-held Garmin GPS that I deem very reliable. At 70 MPH it seemed to match pretty good at 3%. The GPS shows in tenths and rounding the number was matching pretty good.

At 40 - 60 MPH, I found that it was a little high and that 2% was a better choice. At 20 - 40 MPH the 2% seemed ideal as well.

It may be the air in my tires or other factors, but 2% seems to be my choice.