TCH Interior LED Lighting List
#27
Re: TCH Interior LED Lighting List
The 3 in the center are simple. Just a small flat-head screw driver to pop them open.
Visors are also easy - flat head screw drivers... Insert at the LEFT side of the light, pop it out of the head liner.
The back (assuming you have a sunroof) is hard. You need to get it out of the head liner, then disassemble it. It not hard, but pretty time consuming.
License plate is pretty easy. Pop out the plastic rivets on the trunk-lid liner, then twist the light sockets to pop them out.
Doors are just like the 3 center lights, screw drive to pop them out.
Trunk Cold Cathode... that's for another thread... if anyone wants to know I'll do a full write up.
Visors are also easy - flat head screw drivers... Insert at the LEFT side of the light, pop it out of the head liner.
The back (assuming you have a sunroof) is hard. You need to get it out of the head liner, then disassemble it. It not hard, but pretty time consuming.
License plate is pretty easy. Pop out the plastic rivets on the trunk-lid liner, then twist the light sockets to pop them out.
Doors are just like the 3 center lights, screw drive to pop them out.
Trunk Cold Cathode... that's for another thread... if anyone wants to know I'll do a full write up.
#29
Re: TCH Interior LED Lighting List
The 3 in the center are simple. Just a small flat-head screw driver to pop them open.
Visors are also easy - flat head screw drivers... Insert at the LEFT side of the light, pop it out of the head liner.
The back (assuming you have a sunroof) is hard. You need to get it out of the head liner, then disassemble it. It not hard, but pretty time consuming.
License plate is pretty easy. Pop out the plastic rivets on the trunk-lid liner, then twist the light sockets to pop them out.
Doors are just like the 3 center lights, screw drive to pop them out.
Trunk Cold Cathode... that's for another thread... if anyone wants to know I'll do a full write up.
Visors are also easy - flat head screw drivers... Insert at the LEFT side of the light, pop it out of the head liner.
The back (assuming you have a sunroof) is hard. You need to get it out of the head liner, then disassemble it. It not hard, but pretty time consuming.
License plate is pretty easy. Pop out the plastic rivets on the trunk-lid liner, then twist the light sockets to pop them out.
Doors are just like the 3 center lights, screw drive to pop them out.
Trunk Cold Cathode... that's for another thread... if anyone wants to know I'll do a full write up.
This PDF might be of help (page IR-19): http://www.within-reason.com/tch/pdf...ining_2007.pdf
Mike