I have been trying to install an aftermarket cd player for two days, it is slowly driving me crazy. I bought a harness for my vehicle and wired it to the aftermarket cd player color for color, however I recieve no power to the unit. I have everything wired correctly as far as color is concerned. This is my first install. Any advice as to what I should do next?

 

Tommorow I will try grounding the black to car chassios somehow, atleast thats what the instructions say....but at the same time it shows a wiring diagram showing the black ground going to the black wire on a harness adapter so it is somewhat misleading.

Aside from attempting to ground the wire, I will check fuzes

WHere should I ground wire? Preferably close to cd player

 

Hope this helps:

Radio 12v white/red + radio harness
Radio Ground black - radio harness
Radio Ignition yellow/red + radio harness
Radio Illumination red/black + radio harness
Factory Amp Turn-on
Power Antenna
LF Speaker +/- grn/blk - lt. green radio harness
RF Speaker +/- grn/yel - gry/red radio harness
LR Speaker +/- blu/wht - blu/blk radio harness
RR Speaker +/- pink - blu/yel radio harness