Valve adjustment Go No-Go method?
#1
Valve adjustment Go No-Go method?
I will be adjusting my valves on my 04 Civic Hybrid this weekend. Found this thread explaining how to do the adjustment. But wanted to understand the go no-go method a bit more.
For example intake valve is calling for 0.15-0.19mm (0.006-0.007inches), Do i adjust with .015mm with slight drag, then try to fit a .20mm in and if it doesn't fit it is ok? I just want to make sure I get it right.
Or is there a special feeler gauge with go and no go sizes on it?
Thanks guys.
For example intake valve is calling for 0.15-0.19mm (0.006-0.007inches), Do i adjust with .015mm with slight drag, then try to fit a .20mm in and if it doesn't fit it is ok? I just want to make sure I get it right.
Or is there a special feeler gauge with go and no go sizes on it?
Thanks guys.
Thread
Topic Starter
Forum
Replies
Last Post
sharpie
Honda Insight
5
03-17-2007 11:07 AM
Jason
Website Questions & Input
0
03-27-2005 02:00 PM