"Check Fuel Cap" message in 06 HCH

Thread Tools

Search this Thread

#11

01-23-2006, 07:56 PM

biotech_chris

Active Enthusiast

Join Date: Sep 2005

Posts: 59

Re: "Check Fuel Cap" message in 06 HCH

Quote:

Originally Posted by Adam_HybridCivic

I have had vehicles with both types of sensors. My truck actually has a pressure sensor and a vapor sensor. I had the vapor sensor replace in the truck. I wasn't actually sure if the HCH II had one or the other or both. Thanks for the info chris, I'll keep that in mind.

No kidding... That's good to know, I've never had experience with the vapor kind. I would prefer both if I had the choice; less chance of blowing myself to kingdom-come.

#12

01-24-2006, 05:51 AM

Mikeyt758

Active Enthusiast

Join Date: Nov 2005

Location: N. Providence, RI

Posts: 148

Re: "Check Fuel Cap" message in 06 HCH

I always tighten my cap to 3 clicks and have never had any problems.

#13

03-27-2006, 11:36 AM

jamriman

06 HCH

Join Date: Nov 2005

Location: NYC

Posts: 45

Re: "Check Fuel Cap" message in 06 HCH

It just happened to me. I tried pressing and holding the start/reset button to reset the error, but it didn't work. Any other suggestions? Thanks!

#14

03-27-2006, 12:21 PM

mexiken

Pretty Darn Active Enthusiast

Join Date: Jan 2006

Location: La Verne, CA

Posts: 362

Re: "Check Fuel Cap" message in 06 HCH

jam,

Read page 68 of the manual....

#15

04-05-2006, 05:45 AM

moosh

Owner

Join Date: Oct 2005

Location: Michigan

Posts: 97

Re: "Check Fuel Cap" message in 06 HCH

I'm getting the same Check Gas Cap message. I tried holding the SEL/RESET button for a long time and the message won't go away. I guess the only thing to do is to wait it out.

#16

04-05-2006, 06:57 PM

AZCivic

Conservative Socialist

Join Date: Feb 2005

Location: Phoenix, AZ

Posts: 878

Re: "Check Fuel Cap" message in 06 HCH

Quote:

Originally Posted by moosh

I'm getting the same Check Gas Cap message. I tried holding the SEL/RESET button for a long time and the message won't go away. I guess the only thing to do is to wait it out.

If the message won't go away, then very likely it was not a temporary out-of-spec reading, it's probably still reading an invalid pressure value. You might want to have the dealer look at it to see if the pressure sensor has failed or gas cap isn't sealing. It's under warranty, after all.