How do you determine mpg?
So what...do you fill the tank, and then drive it until it runs out of gas and see how many miles you've gone?
|
Re: How do you determine mpg?
I take the amount of gas I put in and divide it by the amount of miles I just drove. This isn't incredably accurate for one tank but over many tanks it gets pretty accurate.
Others use the displays |
Re: How do you determine mpg?
I'd prefer to go by my car's OBD, but alas... I don't trust it. I calculate my miles per gallon the old-fashioned way... miles divided by gallons.
tbaleno... if i read your comment correctly, you've got it backwards. |
Re: How do you determine mpg?
Originally Posted by myndreach
So what...do you fill the tank, and then drive it until it runs out of gas and see how many miles you've gone?
There was another thread about the display - I think it's safe to say do not trust it. Mine is an average 3.0 gallons off, always on the high side. |
Re: How do you determine mpg?
"divide miles driven by gallons put in"
ummm...so how do you determine how many gallons you've used without driving it to empty? |
Re: How do you determine mpg?
Originally Posted by myndreach
"divide miles driven by gallons put in"
ummm...so how do you determine how many gallons you've used without driving it to empty? I track both the calculated data and the display data. I use TripA for each tank and TripB for long term mpg (as long a period as I can before I accidentally reset it - about 4000 miles last time.) The A mpg is usually off by 2-10%, but after a couple tanks, the B display tends to be right on, within a half mpg or so. So... I trust the display for the most part, but go to the calculator for the exact figures. I made a notebook with columns for all the data. |
Re: How do you determine mpg?
how do you determine how many gallons you've used without driving it to empty? I think most folks fill it to the first or second click-off, which is what is supposed to be done. Personally I fill past that point and put all it will take. I do that to fill up less, and since the nozles's click-off point is different than another I believe is a bit more accurate. I think either one of the above methods will give reasonably accurate results. Simply running out of gas isn't a good idea as already pointed out, and is still not an accurate measure, if you were to fill the car again at the nearest station. I belive to get a truly accurate measure you'd have to start with a vehicle void of fuel- gas lines, vapor lines, injectors, pump and the tank itself blown clear of fuel. Then carefully measure fuel into a calibrated container and pour that specific amount into your verified empty vehcile. (BTW this is how the first gas pumps functioned a very long time ago) Obviously that isn't practical. ;) |
Re: How do you determine mpg?
Originally Posted by myndreach
"divide miles driven by gallons put in"
ummm...so how do you determine how many gallons you've used without driving it to empty? |
Re: How do you determine mpg?
Originally Posted by myndreach
So what...do you fill the tank, and then drive it until it runs out of gas and see how many miles you've gone?
You fill your tank up all the way to the top where if you put in (One-More-Drop) it would run out on the ground. This takes practice and the right pump because you have to try several pumps to find one that will just barely put the fuel out so you can pull the gas handle out of the tank and watch the fuel as it is going into your tank very slowly until it reaches the top of the filler tube and like I said, fill it until one more drop and it would run out on the ground. This takes some practice because you certainly don't want gas running down the side of your car. Thats why I said you have to some times try different pumps to find one that does not have a very strong pumping force that will allow you to put the fuel in very slowly once it reaches the top of the filler tube. This does take some time and patience. Alot-Of-Patience: Once you have done this drive the car until you put I would think several hundred miles on it at least and then, once again go through the fill up process again. The amount of gas you just (Refilled-Tank-With) all the way to the top of the filler tube like you did the first time so you know for sure that the tank will not take one more drop of fuel before it drips on the ground. Now divide the (Gallons Into The Miles Driven) Theres your exact FE (Fuel-Economy) no guess work: Example: 300/10=30 MPG (Miles-Per-Gallon) 300 Miles Driven, Divided By Gallons You Refill With Equals, AVG. M.P.G. (Average-Miles-Per-Gallon) HTH Terry |
All times are GMT -7. The time now is 08:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands