Electric Vehicle Forums

Electric Vehicle Forums (/forums/)
-   Nissan Altima Hybrid/Infiniti M35h/ Q50 hybrid (https://electricvehicleforums.com/forums/nissan-altima-hybrid-infiniti-m35h-q50-hybrid-58/)
-   -   2008 hybrid: Replacing OEM headlamp bulbs (https://electricvehicleforums.com/forums/nissan-altima-hybrid-infiniti-m35h-q50-hybrid-58/2008-hybrid-replacing-oem-headlamp-bulbs-21836/)

rps944 06-02-2009 09:42 AM

2008 hybrid: Replacing OEM headlamp bulbs
 
Here's an FYI regarding headlamp bulb replacement: First, as most of you know, you have to go in through the wheel wells to replace the low beams. While you're in there, you can also replace the high beams but that can be done (not real easily) through the engine compartment if your hands aren't too big.

Anyway, on the 2008 hybrid (I don't know if this is valid for any other year), the owners manual lists H1 and HB3 lamps as the bulb types. WRONG! The correct bulb types are H11 and H9. I replaced mine with PIAA Xwhites last July and so far, so good. I don't know if H9s are being used regularly in autos now - I learned that they are used primarily
in motorcyles and are sold in single units, not a pair (at least that's what I found last year).

I hope this info helps someone to avoid the mistake I made: looking up the bulb types in the manual and then ordering them, only to find when I go to replace them that both sets were wrong. If anyone's interested, I have a new pair of PIAA Xwhite H1 and HB3 available cheap :)
Bob

cephraim 06-03-2009 06:32 AM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
Thanks! That's great info!

mean-boy 06-14-2009 09:25 PM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
Has anyone installed xenon in the NAH? I've seen posts where regular Altimas owners installed xenon lights either through kits or headlight housing conversions.

langjie 06-15-2009 07:30 AM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
Yes, I have

mean-boy 06-15-2009 08:50 AM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
Did you use the OEM non hid housing or did you change to the OEM hid housing?

langjie 06-15-2009 10:32 AM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
Yeah, the factory non hid housing. I think there is scatter so I try to point my lights a bit lower. I wish HID's were a factory option, oh well

mean-boy 06-15-2009 04:30 PM

Re: 2008 hybrid: Replacing OEM headlamp bulbs
 
There was a write up using the 3.5 SE xenon housing and it didn't look too complicated except for the bumper removal. I think the used headlights with ballasts and bulbs were $450 or so. There was a small cost for the wiring harness. I don't think this was done to a NAH but a 2.5S.


All times are GMT -7. The time now is 02:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands