Scan Gauge II Setup
#1
Scan Gauge II Setup
If you bought a Scan Gauge II - be sure to change the engine type to HYBRID or the unit will time out, as I found out the hard way - its in the book but who reads the book....
HOME>MORE>SETUP>FUEL>HYBRID
HOME>MORE>SETUP>FUEL>HYBRID
#2
Re: Scan Gauge II Setup
My SG2 shutoff at the first stoplight which reminded me to set the fuel type.
I set the speed correction to 3% and now my GPS and the SG2 match as far as current speed is concerned. Trip distance is still slightly off but not as much as before the correction.
I set the speed correction to 3% and now my GPS and the SG2 match as far as current speed is concerned. Trip distance is still slightly off but not as much as before the correction.
#3
Re: Scan Gauge II Setup
At 40 - 60 MPH, I found that it was a little high and that 2% was a better choice. At 20 - 40 MPH the 2% seemed ideal as well.
It may be the air in my tires or other factors, but 2% seems to be my choice.
Thread
Topic Starter
Forum
Replies
Last Post