new Scanguage software available

Thread Tools
 
Search this Thread
 
  #11  
Old 09-29-2007, 02:30 PM
cngrevolution's Avatar
Active Enthusiast
Join Date: Apr 2007
Location: McKinney, Tx
Posts: 165
Default Re: new Scanguage software available

Just so everybody knows if you search on priuschat.com they already have a group buy going on. I bought one with no tax no shipping for $149 out the door!!
 
  #12  
Old 09-29-2007, 04:04 PM
arbie2's Avatar
Enthusiast
Join Date: Mar 2006
Posts: 30
Default Re: new Scanguage software available

My original Scanguage does not recognize FEH Fuel Injector Shut-off during
ICE run-up, rendering it useless for mileage calculations on many routes I travel.
E.g., on one 18 mile downhill, my Scanguage erroneously reports only 30 mpg,
when, in fact, I getting well over 120 mpg!

Does the new Scanguage II software recognize Fuel Injector Shut-off during
ICE run-up? SPL proposed using OPEN/CLOSE LOOP for detecting Fuel
Injector Shut-off.

rb
 
  #13  
Old 09-29-2007, 04:42 PM
DesertDog's Avatar
Pretty Darn Active Enthusiast
Join Date: Jun 2007
Location: Dry Heat, AZ
Posts: 311
Default Re: new Scanguage software available

Originally Posted by arbie2
My original Scanguage does not recognize FEH Fuel Injector Shut-off during
ICE run-up, rendering it useless for mileage calculations on many routes I travel.
E.g., on one 18 mile downhill, my Scanguage erroneously reports only 30 mpg,
when, in fact, I getting well over 120 mpg!

Does the new Scanguage II software recognize Fuel Injector Shut-off during
ICE run-up? SPL proposed using OPEN/CLOSE LOOP for detecting Fuel
Injector Shut-off.

rb
Ron has been working on this, but I don't know if it's solved yet. The open/closed loop by itself isn't sufficient. WOT acceleration is open loop, but you're burning a lot of gas. Mode $01, PID $03 actually contains more than just open/closed on most cars, but I don't know if the majority report the reason for open/closed like the FEH does. Also the FEH has a PID indicating fuel cut mode, but again Ron needs something to work for the vast majority of vehicles. I'll ask about it when I send him my FEH xgauge codes. I am actually a revision behind in my firmware, so maybe he'll upgrade mine to 3.15.
 
  #14  
Old 09-29-2007, 08:07 PM
Billyk's Avatar
Ridiculously Active Enthusiast
Join Date: Nov 2006
Location: Southwestern Pa
Posts: 1,747
Default Re: new Scanguage software available

Originally Posted by cngrevolution
Just so everybody knows if you search on priuschat.com they already have a group buy going on. I bought one with no tax no shipping for $149 out the door!!
My only question on this deal is whether the unit contains the latest firmware/software?
 
  #15  
Old 09-30-2007, 08:28 AM
08hybridok's Avatar
Ridiculously Active Enthusiast
Join Date: May 2007
Posts: 592
Default Re: new Scanguage software available

Originally Posted by Billyk
My only question on this deal is whether the unit contains the latest firmware/software?
I thought the same thing... So I started skimming through the info message thread. on 9/16 this message was posted:
Hey there all -

First of all, Jeffk, I'm not sure why you haven't received our responses, but I hope you received my follow-up email this morning.

Just to update everyone - Linear Logic has run into some problems with the new codes in the updated ScanGaugeII for the Prius. They are finalizing some testing today and hope to have units on their way to me early next week. Once I receive them, we'll start shipping them ASAP.
So sounds like they are comming straight from SG. Maybe Alex, or someone, can post to the Prius board and find out for sure?

That same thread also had a couple of people complain that they ordered and didn't get it yet, after 2 weeks. That's when the above quote was responded. So I assume these people were ordering, SG was updading to the latest version and therfor has a lag in shipping times. But everyone knows what happens when we assume...

I think I'll wait a couple of days and see what we can find out here. Then better make sure the couch is cozy, 'cause after I get it the wife might be mad At least her dad taught me, buy first, explain later but on the other hand, she may like the new widget too, it's kinda coin toss, depends on the side of the bed thing ya know
 
  #16  
Old 10-02-2007, 09:19 PM
DesertDog's Avatar
Pretty Darn Active Enthusiast
Join Date: Jun 2007
Location: Dry Heat, AZ
Posts: 311
Default Re: new Scanguage software available

SO, has anybody gotten their "new" scangauges yet???
 
  #17  
Old 10-03-2007, 03:34 AM
jmorton10's Avatar
Ridiculously Active Enthusiast
Thread Starter
Join Date: Apr 2006
Posts: 600
Default Re: new Scanguage software available

Originally Posted by DesertDog
SO, has anybody gotten their "new" scangauges yet???

Nope

~John
 
  #18  
Old 10-03-2007, 11:16 AM
08hybridok's Avatar
Ridiculously Active Enthusiast
Join Date: May 2007
Posts: 592
Default Re: new Scanguage software available

Any news on a group buy/discount yet either? I'm tempted to order from Priuschat, but havn't learned yet if they are the newest version.

Ok, I'm impatient. I decided I wanted to have one by the weekend (hopefully) So I called SG. Jeremey (I think he said) took my call. He asked where I heard of SG? I said this site, and jokingly said that means 1/2 price right?! He said well, no, but I can sell it to you at $149.95. Sweet! So now the online price is $169.95 so I "saved" $20 He said it has the newest software which he said has the SOC in it. So hopefully it's so easy a caveman can do it, then maybe I'll have a chance of figuring it out?!
 

Last edited by 08hybridok; 10-03-2007 at 01:28 PM.
  #19  
Old 10-03-2007, 12:59 PM
jmorton10's Avatar
Ridiculously Active Enthusiast
Thread Starter
Join Date: Apr 2006
Posts: 600
Default Re: new Scanguage software available

OK, my new SG came today but I still need the codes for the FEH SOC????

~John
 
  #20  
Old 10-03-2007, 01:39 PM
jmorton10's Avatar
Ridiculously Active Enthusiast
Thread Starter
Join Date: Apr 2006
Posts: 600
Default Re: new Scanguage software available

Originally Posted by GaryG
Remember, you can plug these SG11's together and monitor all the gauges you want at the same time.
That's a good idea Gary, do I need a special cable to daisy chain two SG's together??

~John
 


Quick Reply: new Scanguage software available


Contact Us -

  • Manage Preferences
  • Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Your Privacy Choices -

    When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

    © 2024 MH Sub I, LLC dba Internet Brands


    All times are GMT -7. The time now is 08:27 PM.