3rd trophy!!
#11
11-08-2009, 12:13 PM
Re: 3rd trophy!!
Changing the oil will not reset the trophy system. Here's what the owners manual says:
The following procedure clears all
leaves and your lifetime points.
This procedure must be followed exactly.
As you progress to a higher level, the
system monitors your driving style
more strictly. As a result, you must
further refine your driving style to
continue to move up to the next level.
Turn the ignition switch to the ON
(II) position. Confirm that the ECON
mode is OFF. If it is OFF, proceed to
step 1. Do run the engine.
The following are some of the
conditions that may effect your
score:
Extremely high or low ambient
temperature
Inconsistent acceleration use, such
as pumping the pedal repeatedly
within a short period of time
Frequent use of the climate
control system
Short distance trips
If the ECONmode is on, press and
release the ECONbutton to turn it
off. You also need to turn the ignition
switch off.
Turn the ignition switch to the ON
(II) position again. Do run the
engine.
Press and release the brake pedal
at least two times.
The ambient meter color changes from blue to
green .
Complete the following steps within
30 seconds:
The ambient meter color
changes only if the multiinformation
display’s meter color change setting is on.
Press and release the ECON
button two times (ECON mode
comes on, then goes off).
The ambient meter color goes off, and
the accumulated data is cleared.
Turn the ignition switch to the
LOCK (0) position.
I just got mine the other day, I'll see if I can reset.
Mike
The following procedure clears all
leaves and your lifetime points.
This procedure must be followed exactly.
As you progress to a higher level, the
system monitors your driving style
more strictly. As a result, you must
further refine your driving style to
continue to move up to the next level.
Turn the ignition switch to the ON
(II) position. Confirm that the ECON
mode is OFF. If it is OFF, proceed to
step 1. Do run the engine.
The following are some of the
conditions that may effect your
score:
Extremely high or low ambient
temperature
Inconsistent acceleration use, such
as pumping the pedal repeatedly
within a short period of time
Frequent use of the climate
control system
Short distance trips
If the ECONmode is on, press and
release the ECONbutton to turn it
off. You also need to turn the ignition
switch off.
Turn the ignition switch to the ON
(II) position again. Do run the
engine.
Press and release the brake pedal
at least two times.
The ambient meter color changes from blue to
green .
Complete the following steps within
30 seconds:
The ambient meter color
changes only if the multiinformation
display’s meter color change setting is on.
Press and release the ECON
button two times (ECON mode
comes on, then goes off).
The ambient meter color goes off, and
the accumulated data is cleared.
Turn the ignition switch to the
LOCK (0) position.
I just got mine the other day, I'll see if I can reset.
Mike
#13
11-10-2009, 08:02 AM
Re: 3rd trophy!!
Thanks for finding this Mac. The PDF didn't cut and paste very well so I have cleaned it up so it's easier to read. The procedure is on page 310 of the owners manual.
I am going to try this myself. Thanks again.
The following procedure clears all leaves and your lifetime points. This procedure must be followed exactly.
Turn the ignition switch to the ON (II) position. Confirm that the ECON mode is OFF. If it is OFF, proceed to step 1. Do NOT run the engine.
If the ECON mode is on, press and release the ECON button to turn it off. You also need to turn the ignition switch off. Turn the ignition switch to the ON (II) position again. Do NOT run the engine.
Complete the following steps within 30 seconds:
1. Press and release the brake pedal at least two times. The ambient meter color changes from blue to green*.
*The ambient meter color changes only if the multiinformation display’s meter color change setting is on. (See page 103.)
2. Press and release the ECON button two times (ECON mode comes on, then goes off). The ambient meter color goes off, and the accumulated data is cleared.
3. Turn the ignition switch to the LOCK (0) position.
Turn the ignition switch to the ON (II) position. Confirm that the ECON mode is OFF. If it is OFF, proceed to step 1. Do NOT run the engine.
If the ECON mode is on, press and release the ECON button to turn it off. You also need to turn the ignition switch off. Turn the ignition switch to the ON (II) position again. Do NOT run the engine.
Complete the following steps within 30 seconds:
1. Press and release the brake pedal at least two times. The ambient meter color changes from blue to green*.
*The ambient meter color changes only if the multiinformation display’s meter color change setting is on. (See page 103.)
2. Press and release the ECON button two times (ECON mode comes on, then goes off). The ambient meter color goes off, and the accumulated data is cleared.
3. Turn the ignition switch to the LOCK (0) position.
Last edited by mrkcohen; 11-10-2009 at 08:08 AM.
Thread
Topic Starter
Forum
Replies
Last Post
