ScanGauge Backlight Remains On
#1
ScanGauge Backlight Remains On
My SGII never turns off the backlight, even with the key out and overnight. It's always illuminated the next morning and with a blank display.
Is this normal operation for the SGII?
Is this normal operation for the SGII?
#2
Re: ScanGauge Backlight Remains On
Nope.... mine shuts off.
#3
Re: ScanGauge Backlight Remains On
Make sure you have selected Hybrid under the Type Of Fuel setting. Other than that, mine comes on sometimes when the PCM wakes up or if you have a dome light on or door ajar.
GaryG
GaryG
#4
Re: ScanGauge Backlight Remains On
Ron did comment that the SG may eventually be capable of reading the battery SoC, sounds like they are working on that.
Last edited by econoline; 02-08-2007 at 08:22 PM.
#5
Re: ScanGauge Backlight Remains On
Yes. My backlight comes on and stays on if I ever open a door ( and get the brakes charging sounds ) or do anything else to "wake the car up" after the key has been removed for the night.
If I just park, and leave everything off in the car the whole time, the ScanGauge stays off the whole time as well.
-John
If I just park, and leave everything off in the car the whole time, the ScanGauge stays off the whole time as well.
-John
Thread
Topic Starter
Forum
Replies
Last Post
Curated Content Editor
Journalism & The Media
0
02-20-2014 05:00 AM
Curated Content Editor
Journalism & The Media
0
12-27-2013 07:20 AM
Curated Content Editor
Journalism & The Media
0
06-13-2013 05:30 PM