2008 FEH Hitch
#11
Re: 2008 FEH Hitch
If you look at post 5 in this thread: https://www.greenhybrid.com/discuss/...ing-feh-13782/
There is a link to a image that shows a hitch installed. Maybe this will help with some of the questions on how it mounts & not needing to cut anything.
There is a link to a image that shows a hitch installed. Maybe this will help with some of the questions on how it mounts & not needing to cut anything.
#12
Re: 2008 FEH Hitch
Hmmm.... if you are willing to work cramped.... you don't have to pop but muffler mounts. At least I didn't with my Draw-Tite and I'm pretty sure its the same hitch, just relabeled.
When you fish the bolts, by the way, if you look there is an opening at the end of the frame rail down at the bumper end... it was easiest to fish them in there from what I found.
Note.... all my comments are on the '06. The '08 might be a bit different.
#13
Re: 2008 FEH Hitch
Hmmm.... if you are willing to work cramped.... you don't have to pop but muffler mounts. At least I didn't with my Draw-Tite and I'm pretty sure its the same hitch, just relabeled.
When you fish the bolts, by the way, if you look there is an opening at the end of the frame rail down at the bumper end... it was easiest to fish them in there from what I found.
Note.... all my comments are on the '06. The '08 might be a bit different.
When you fish the bolts, by the way, if you look there is an opening at the end of the frame rail down at the bumper end... it was easiest to fish them in there from what I found.
Note.... all my comments are on the '06. The '08 might be a bit different.
I fished the bolts thru the ends too. Much easier if you ask me.
Thread
Topic Starter
Forum
Replies
Last Post