First Accessory for our Hybrids! Pics
4 Attachment(s)
I had a friend (shop) build a stainless tail pipe for my Yukon Hybrid. I couldn't handle the look of that large resonator across the back. It is constructed from T-304 Stainless Steel and features rolled stainless tips. I had him design something classy and high quality looking. It sounds about the equivalent of a stock non-hybrid model, and actually maybe a little bit quieter. I really only notice it outside at idle, and it also allows for the use of a spare tire.
He is a very small shop so I have offered to help him sell these. In fact I have already sold a couple to the local Cadillac dealer for the Escalade Hybrid. They install in about 30 minutes (cut and clamp using existing hangers). If you are interested in buying one of these, please paypal $229.00 + 35.00 for shipping and handling to kkjb06@hotmail.com. Please specify Yukon/Tahoe or Escalade (Escalade is different because of rear bumper). I really think you will be happy with your purchase. I have had many compliments. They sold it as a no-compromise Hybrid, I think adding a few accessories would fall into that category. |
so I'm assuming you eliminated the resonator?
Originally Posted by macmtr
(Post 199953)
I had a friend (shop) build a stainless tail pipe for my Yukon Hybrid. I couldn't handle the look of that large resonator across the back. It is constructed from T-304 Stainless Steel and features rolled stainless tips. I had him design something classy and high quality looking. It sounds about the equivalent of a stock non-hybrid model, and actually maybe a little bit quieter. I really only notice it outside at idle, and it also allows for the use of a spare tire.
He is a very small shop so I have offered to help him sell these. In fact I have already sold a couple to the local Cadillac dealer for the Escalade Hybrid. They install in about 30 minutes (cut and clamp using existing hangers). If you are interested in buying one of these, please paypal $229.00 + 35.00 for shipping and handling to kkjb06@hotmail.com. Please specify Yukon/Tahoe or Escalade (Escalade is different because of rear bumper). I really think you will be happy with your purchase. I have had many compliments. They sold it as a no-compromise Hybrid, I think adding a few accessories would fall into that category. |
Re: so I'm assuming you eliminated the resonator?
Originally Posted by jet1
(Post 199962)
I hope it doesn't void your emissions warranty and related components. Looks pretty good though!
|
What does it sound like in V4 mode?
I recall that when the 5.3 with V4 mode was released a lot of people had trouble with a terrible droning sound in V4 mode after installing aftermarket exhaust. It seemed to require at least a small resonator near the tip to eliminate this sound. Perhaps the 6.0 hybrid version is different, but would like to know what it sounds like in the cabin when running in V4 mode.
I don't have a Hybrid yet, but plan to very soon and would like this type of tip style for the reasons you mentioned and then some. :) Thanks! |
please contact me
|
Re: What does it sound like in V4 mode?
Originally Posted by macdracer
(Post 200226)
I recall that when the 5.3 with V4 mode was released a lot of people had trouble with a terrible droning sound in V4 mode after installing aftermarket exhaust. It seemed to require at least a small resonator near the tip to eliminate this sound. Perhaps the 6.0 hybrid version is different, but would like to know what it sounds like in the cabin when running in V4 mode.
I don't have a Hybrid yet, but plan to very soon and would like this type of tip style for the reasons you mentioned and then some. :) Thanks! Jason |
Re: First Accessory for our Hybrids! Pics
5 Attachment(s)
Attachment 1114
Attachment 1115 Attachment 1116 Attachment 1117 Attachment 1118 Just finished the installation of the exhaust I got from Jason. Let me tell you its all he says and more! Brought the vehicle to my local GM dealer after it was installed and they were very impressed with the look and build quality. I was worried that that removing the resonator would change the stock sound but actually I cannot detect any differance in the sound in any mode. After I hauled that resonator and pipe off and realized how heavy it was its amazing that GM did not come up with this idea. At least now I can mount a spare tire (if I choose to) . I don't know if this is the first install in Canada but I'm guessing it won't be the last. Jason supplies good instructions and pictures so its somthing that you can tackle or your (friendly) muffler shop will install it for you. Watch the resonator though its heavier than I anticipated. I think I will make a lawn ornament out of it. |
Re: First Accessory for our Hybrids! Pics
Was the shipping charge the same to Canada? I'm thinking of getting one too. Sure looks good.
|
looks and works good!
Originally Posted by Canuck
(Post 202171)
Was the shipping charge the same to Canada? I'm thinking of getting one too. Sure looks good.
|
Re: First Accessory for our Hybrids! Pics
Originally Posted by Canuck
(Post 202171)
Was the shipping charge the same to Canada? I'm thinking of getting one too. Sure looks good.
|
All times are GMT -7. The time now is 12:29 PM. |
© 2024 MH Sub I, LLC dba Internet Brands