Normally, my vehicles have easily accessible headlight adjustment screws mounted on top of the back of each headlight.

Lift the hood, get your Philips-Head and in a couple of turns, you're in business.


No Joy so far in locating these on the CamHy.

Help.

 

It's not a screw but you do use a Philips screwdriver to make the adjustment. Look for a 2 cm diameter metal disc with a serrated lip. It's between the high beam and low beam and about 5 cm below the midline of the high beams.

 

Thanks Eric, I found it.

Do you have any more information you could share?

i.e. Since there's only one per side, are these for lateral or height adjustment, and what effect does a clockwise turn of the screwdriver yield?

I'd rather learn from your experience first, before I start fiddling with it.

 

Eskimonio — Here's the Repair Manual information about adjusting the TCH's headlights.

Stan

 

As far as I know, there's no horizontal adjustment. I've attached the part of the service manual that covers headlight adjustment.

 

Thanks gents.

Mind pointing me to where I might find a digital copy of that repair manual?

I've tried the one at CamryManuals.com and it's giving me fits on the burn. https://www.greenhybrid.com/discuss/...ad.php?t=14869


************ Edit ************

Nevermind on question above...it was pointed out to me that Nero won't burn that image...ImgBurn worked fine. Thanks!